Optional Adjustments; Enabling Vcom To Adjust The Picture - Sony KDL-32EX655 Service Training Manual

OPTIONAL ADJUSTMENTS

All Sony TVs are set for optimal viewing performance. Refer to the following
instructions if the customer requests additional adjustments.

ENABLING VCOM TO ADJUST THE PICTURE

The VCOM adjustment displays a Green screen while you adjust the picture.
1. Take the TV out of deep Standby mode by pressing
turn on the TV.
POWER
2. Press to turn the TV back off.
3. Press the following buttons on the Remote Commander within a
second of each other:
DISPLAY
Channel
DIGITAL
001 OP
000 VERS
<MAIN>
DM1.027AAA
WF1.002W00AA
DF3.130W00AA
YM1.409W00AA
M4.091C
(DM1.027AAA)
DD1.009W00AA
PK1.009W00AA
MID:1C23A225
PID:04047040
PNL:LTY320HN0301
TUNER: ENABLE
JUMP OPTIONS
4. Press or
VPC menu displays.
2
5. Press to move to the 002 VCOM category.
VPC
002
000
KDL-32EX655/40EX655/46EX655
SECTION 5 - UPDATES AND ADJUSTMENTS
5 + POWER
Volume
SERVICE
---
<EXT>
AA RF:0000
WF:9.2.1.12.4
WF:0A
FD:0.068
<PEM>
-------------------
-------------------
-------------------
-------------------
on the Remote Commander until the
SERVICE
VCOM
ENABLE 0
6. Enable the VCOM by pressing
7. Press
POWER
to
8. Change the value of the 001 ADJUST item to adjust the picture by
pressing
value.
NOTE: When changing the data value, the screen will turn green
for approximately 3 seconds before returning to the service
adjustment screen.
9. When the picture is clear, press
(Save) the changes.
10. Do one of the following:
a. If adjustments are complete, exit service mode by turning the
b. Proceed to
3
to increase the data value to 1.
1
to move to the 001 ADJUST item.
VPC SERVICE
002 VCOM
001 ADJUST
3
to increase the data value or
VPC SERVICE
001 VCOM
001 ADJUST
MUTING
VPC WRITE
002 VCOM
001 ADJUST
TV power off.
"Setting White Balance Adjustments".
64
6
to decrease the data
69
0
then to WRITE
64
39