Clas Ohlson WX0009 Manual

Twilight Switch with Timer
Art.no 36-6900 Model WX0009
Please read the entire instruction manual before using the product and then save it for future reference.
We reserve the right for any errors in text or images and any necessary changes made to technical data.
In the event of technical problems or other queries, please contact our Customer Services.
Safety
• The product must only be connected to an AC/DC
adaptor with an output of 24–36 V DC, max 0.35 A.
• Never use the product if the adaptor, the power
cable or the string light is damaged in any way.
Product description
Twilight switch with light
sensor (1).
Note: Make sure that
the light sensor is not
pointing towards the ground
or is covered over.
Installation
1. Connect the male connector on the twilight switch
to the power adaptor of the string light (it only fits
one way) and tighten the connection by screwing on
the lock nut.
2. Connect the female connector on the twilight switch
to the string light (it only fits one way).
GREAT BRITAIN • CUSTOMER SERVICE
tel 020 8247 9300 internet www.clasohlson.co.uk e-mail customerservice@clasohlson.co.uk
postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
Instructions for use
The twilight switch has two functions
Light sensor (for changing light conditions)
1. When the light sensor detects darkness, the string
light is switched on.
2. When the light level increases the string light is
switched off.
Timer (for constant darkness)
1. When there is no light the timer function will switch
the string light on for 8 hours.
2. After 8 hours the timer function will not switch
the string light on again for another 16 hours.
3. After 16 hours the timer function will switch the string
light on for 8 hours and so on.
Care and maintenance
1
Disconnect the twilight switch from the adaptor and
the string light and store it in a dry and dust-free area
out children's reach whenever it is not to be used for
an extended period.
Responsible disposal
This symbol indicates that this product
should not be disposed of with general
household waste. This applies throughout
the entire EU. In order to prevent any
harm to the environment or health hazards
caused by incorrect waste disposal,
the product must be handed in for recycling
so that the material can be disposed of in
a responsible manner. When recycling your
product, take it to your local collection facility
or contact the place of purchase. They will
ensure that the product is disposed of in
an environmentally sound manner.
Specifications
Power supply
IP rating
24–36 V DC, max 0.35 A
IP44