General Information; Functional Description - oventrop OV-DMC 3 Operating Instructions Manual

"OV-DMC 3" Software
1.

General information

The original operating instructions were drafted
in German.
The operating instructions in other languages
were translated from German.
1.1 Validity of the operating
instructions
These operating instructions are valid for
the software of the measuring system "OV-
DMC 3".
1.2 Contact
Address
OVENTROP GmbH & Co. KG
Paul-Oventrop-Straße 1
D-59939 Olsberg
Germany
Technical service
Phone: +49 (0) 29 62 82-234
1.3 Copyright and protective
rights
These operating instructions are copyrighted
and are exclusively designed for persons
involved with the product.
1.4 Information regarding
operating instructions
1.4.1 Used symbols
Important information and further
explanations
Action required
f
• Enumeration
1. Fixed order. Steps 1 to X.
2.
Result of action
Z
106927881-V02.02.2020
General information
2. Safety-related information
2.1 Normative directives
The legal framework conditions valid at the
installation location must be observed.
The currently valid standards, rules and
guidelines must be observed.
2.2 Correct use
Safety in operation is only guaranteed if the
product is used correctly.
The measuring system "OV-DMC 3" is
especially designed for a simple and quick
regulation of heating and cooling installations.
Any use of the product outside the above
applications will be considered as non-
compliant and misuse.
The observance of the operating instructions is
part of the compliance terms.
Claims of any kind against the manufacturer
and/or his authorised representatives, due to
damages caused by incorrect use cannot be
accepted.
2.3 Modifications to the product
Modifications to the product are not allowed.
In case of modifications to the product, the
warranty will become void. The manufacturer
will not accept liability for damages and
malfunctions caused by modifications to the
product.
3.

Functional description

Hydronic balancing can be carried out on site
with the help of the free Oventrop software.
4. Installation/Updates
Follow the instructions of the installation
programme.
Depending on your system settings, updates
will be installed automatically or after
confirmation.
EN
10