Table of Contents
Advertisement
The AXTX3 transmitter has been turned ON and will enter the initialization cycle (boot
up).
CANCEL/BACK
There are two push buttons located adjacent to the OLED display screen. The function
of the button on the left is Cancel/Back. To select a menu header, press in on the
joystick button on the right. Using the joystick controller, scroll up or down through the
menu headings: STATUS / CONFIG RF / CONFIG VIDEO / CONFIG AUDIO / CONFIG
DATA / PRESET / PATTERN GENERATOR / UNIT. Select by pressing the right joystick
button in then scroll up or down to the sub-menu, press the button in again to backlight
a selection, and then scroll to the desired setting. Press the right button in again to
ENTER/CONFIRM setting.
setting prior to pressing ENTER/CONFIRM.
4 Wave Central LLC
TRANSMITTER MENU GUIDE
WAVE CENTRAL
INITIALIZATING....
DISPLAY SCREEN
Pressing the Cancel/Back button will restore the previous
5850.000
RF:
ON
RLoD 1920X1080i 29fps
DEFAULT MENU
AXTX3 with PAINT
PRESET:
11
TEMP:
44
SCROLL/ENTER
CONFIRM
June 2019
Advertisement
Table of Contents
