Related Manuals for Wave Central AXTX3
Summary of Contents for Wave Central AXTX3
- Page 1 AXIS AXTX3 TRANSMITTER with AXIS PAINT Menu Guide June 6, 2019 Wave Central LLC 99 Garden Parkway, Suite C., Carlisle, PA 17013 +1 888 736 9283 www.wavecentralrf.com 1 Wave Central LLC AXTX3 with PAINT June 2019...
- Page 2 FORWARD This document provides detail for the menus used for the AXTX3 transmitter with AXIS Paint. It is recommended that the user reads the Operations manual for the AXIS TX PICO PLUS TRANSMITTER and AXIS PAINT. These are available at www.wavecentralrf.com...
- Page 3 The illustration on the right is the correct BNC connector. Failure to do so will damage the BNC connector(s). The customer is liable for any damages for not adhering to this practice. 3 Wave Central LLC AXTX3 with PAINT June 2019...
- Page 4 TRANSMITTER MENU GUIDE WAVE CENTRAL The AXTX3 transmitter has been turned ON and will enter the initialization cycle (boot up). INITIALIZATING…. CANCEL/BACK DISPLAY SCREEN SCROLL/ENTER CONFIRM There are two push buttons located adjacent to the OLED display screen. The function of the button on the left is Cancel/Back.
- Page 5 EMBEDDED 1 Mode: STEREO Encoder: MPEG-1 LAYER2 Bitrate: 192kbps Press the left button (CANCEL/BACK) to return to the STATUS menu. Scroll down to the next menu using the right joystick button. 5 Wave Central LLC AXTX3 with PAINT June 2019...
-
Page 6: Configuration Menus
To change RF POWER, press the right joystick button in to highlight, and then scroll up or down to select the power level. Then press the right joystick button in again to ENTER/CONFIRM. Scroll down to the next menu. 6 Wave Central LLC AXTX3 with PAINT June 2019... - Page 7 RF FREQUENCY 5880.000 CHANGE FREQUENCY BY USING THE LEFT, RIGHT, UP AND DOWN JOY STICK, SCROLL AND THEN PRESS IN TO CONFIRM/ENTER EACH INTEGER CHANGED. RF FREQUENCY 5880.000 NEW FREQUENCY SET 7 Wave Central LLC AXTX3 with PAINT June 2019...
- Page 8 RF CONSTELLATION 16-QAM RF CONSTELLATION (QPSK, 16-QAM OR 64-QAM) RF FEC RF FEC (1/2, 2/3, 3/4, 5/6 AND 7/8) RF GUARD INT 1/32 RF GUARD INT (1/32, 1/16, 1/8 AND 1/4) 8 Wave Central LLC AXTX3 with PAINT June 2019...
-
Page 9: Video Source
1080p 23.97, 1080p 24, 1080p 24, 1080p 29.97, 1080p30, 1080psf 23.976, 1080psf 24, 1080pfs 25, 1080psf 29.97, 1080psf 30, 1080p 50, 1080p 59, 1080p 60, 1080dl 50, 1080dl 59 and 1080dl 9 Wave Central LLC AXTX3 with PAINT June 2019... -
Page 10: Video Format
Pressing the button on the left of the LED display will take you to the top menu level. Scroll down using the right joystick button. The next menu heading is CONFIG AUDIO. 10 Wave Central LLC AXTX3 with PAINT June 2019... -
Page 11: Config Audio
Use the joystick button to scroll down to the next menu. In a similar way, the sub menus can be selected. AUDIO SOURCE 2 EMBEDDED 2 AUDIO SOURCE 2 (OFF, ANALOG, DIFFERENTIAL, EMBEDDED 1 and EMBEDDED 2) 11 Wave Central LLC AXTX3 with PAINT June 2019... - Page 12 (MPEG-1 LAYER1 and MPEG-1 LAYER2) AUDIO BITRATE 192kbps AUDIO BITRATE (32kbps, 48kbps,56kbps,64kbps, 80kbps, 96kbps, 112kbps, 128kbps, 160kbps, 192kbps, 224kbps, 256kbps, 320kbps and 384kbps) Use the joystick button to scroll down to the next menu. 12 Wave Central LLC AXTX3 with PAINT June 2019...
- Page 13 (0 through 63) Use the joystick button to scroll down to the next menu. 2v MIC OPTION 2v MIC OPTION (ON/OFF) Press the left button to return to the configuration menu. 13 Wave Central LLC AXTX3 with PAINT June 2019...
-
Page 14: Config Data
Use the joystick to scroll down to the next menu. DATA BAUD 4800 DATA BAUD (1200, 2400, 4800, 9600, 19200, 38400, 57600 and 115200) Use the joystick to scroll down to the next menu. 14 Wave Central LLC AXTX3 with PAINT June 2019... - Page 15 Press the left button again to return to the home menu. 5850.000 PRESET: TEMP: RLoD 1920X1080i 29fps Press the right joystick button in and then scroll down to the PRESET menu. 15 Wave Central LLC AXTX3 with PAINT June 2019...
-
Page 16: Current Preset
Use the right joystick button, press in to select PRESET. The CURRENT PRESET is displayed, which is preset number eleven (11). CURRENT PRESET Pressing the right joystick button will backlight the preset current number CURRENT PRESET 16 Wave Central LLC AXTX3 with PAINT June 2019... - Page 17 Remember if any parameters in other menus were changed and saved, they will now be recalled in this preset in these examples. Wave Central will pre-configure the 16 operating frequencies for the operating band plan in Presets 1 – 16. The other parameters: video, audio, etc.
-
Page 18: Pattern Generator
The internal pattern generator provides Video and Audio test signals. Control can be automatically selected when the SDI input video signal is disconnected from the AXTX3 transmitter’s input BNC connector. Press the right joystick button in to enter into the sub-menus. - Page 19 Press CANCEL/BACK using the left push button to return to PATTERN GENERATOR screen. PATTERN GENERATOR PATTERN GENERATOR Use the right joystick button to scroll down to next menu, which is the UNIT menu. 19 Wave Central LLC AXTX3 with PAINT June 2019...
- Page 20 UNIT UNIT Pressing in on the joystick button once will display the unit’s FPGA temperature. TEMPERATURE TEMPERATURE (Degrees Celsius) Scrolling down will display various unit information TX VERSION 3.3.1 TX VERSION 20 Wave Central LLC AXTX3 with PAINT June 2019...
-
Page 21: Service Name
SERIAL NUMBER f8200008 SERIAL NUMBER SERIAL U PICO VERSION P.1.1 MBER PICO VERSION MCU VOLTAGE 16.1 MCU VOLTAGE (FPGA) SERVICE NAME Wave-01 SERVICE NAME 21 Wave Central LLC AXTX3 with PAINT June 2019... -
Page 22: Menu Guide
AXIS AXTX3 with AXIS PAINT Camera Paint Control and Data Modem Receiver MENU GUIDE June 6, 2019 Wave Central LLC 99 Garden Parkway, Suite C., Carlisle, PA 17013 +1 888 736 9283 www.wavecentralrf.com 22 Wave Central LLC AXTX3 with PAINT... - Page 23 The AXTX3 transmitter’s companion module CAMERA PAINT is for controlling various camera parameters for the camera manufactures associated Camera Control Unit (CCU). This data is received by an onboard UHF receiver and data modem. There are two push buttons located adjacent to the display screen. The function of the button to the left is Cancel/Back from a current menu to the Home screen.
- Page 24 Press the right button to select, and then scroll down the listing of various cameras. Camera Manufacturer Panasonic Studio Panasonic Studio Camera Manufacturer Sony Sony Camera Manufacturer Panasonic Camcorder Panasonic Camcorder 24 Wave Central LLC AXTX3 with PAINT June 2019...
- Page 25 Camera Manufacturer GV LDK GV LDK Camera Manufacturer Ikegami Ikegami Camera Manufacturer Hitachi Hitachi Camera Manufacturer GV LDX GV LDX 25 Wave Central LLC AXTX3 with PAINT June 2019...
- Page 26 Camera Manufacturer GV Bidir GV Bidir (Not used) Camera Manufacturer NAC HiMo NAC HiMo (Not used) Camera Manufacturer Videosys Videosys (Not used) Camera Manufacturer Sony Tally Only Sony Tally Only 26 Wave Central LLC AXTX3 with PAINT June 2019...
- Page 27 Disables camera ctrl Enter to continue. The screen will revert back to the main menu if a selection is not made within five seconds. Radio Functions Freq = 455.5875MHz Change Frequency 27 Wave Central LLC AXTX3 with PAINT June 2019...
- Page 28 After a few seconds the screen returns to: Main Menu Radio. Scroll down to the next menu. Main Menu System Press right button in to enter next menu. System Functions Software Version Press the right button again. 28 Wave Central LLC AXTX3 with PAINT June 2019...
- Page 29 Scroll down to the next menu. System Functions Serial Number Scroll down for next menu. System Functions License Key 1 License Key 1 Press right button in to display License Key 1 29 Wave Central LLC AXTX3 with PAINT June 2019...
- Page 30 In a similar way navigate this menu as in License Key 1. Press the right button in to return to the next System Functions menu. System Functions Camera Options Camera Options Press the right button in for next menu. Camera Options 5600K Press right button in for next menu. 30 Wave Central LLC AXTX3 with PAINT June 2019...
- Page 31 Press the left button in to return the Main Menu Main Menu System Main Menu (System) Scroll down to the next menu. Main Menu Camera Number Press the right button in to enter the Camera Number. 31 Wave Central LLC AXTX3 with PAINT June 2019...
- Page 32 Tally: Neither This concludes the menu structure for the camera paint data modem and receiver. Wave Central LLC 99 Garden Parkway, Suite C., Carlisle, PA 17013 +1 888 736 9283 www.wavecentralrf.com 32 Wave Central LLC AXTX3 with PAINT June 2019...