West Bend 7000 Instruction Manual page 7

6. Align and slide the food pusher down into the juicer cover.
Your juice extractor is now ready to use.
7.
Place the appliance on a dry, level, heat-resistant surface, away from any edge.
8.
Plug cord into a 120 volt AC electric outlet only.
9.
10. Turn the juice extractor on for a few seconds using the pulse, "P" switch position
to ensure everything is functioning and all safety switches have been activated.
If the juicer will not turn on, unplug from electrical outlet, disassemble, and
check the alignment of all the parts to ensure they are properly positioned.
Note: Do not run the juicer dry for more than a few seconds as extended
periods of dry operation could cause damage to the juicer.
Step 6
Step 10
7