Others; Precautions; Clutch Disassembly Procedure - Yanmar YSE8 Service Manual

10-2.4
Emery paper, emery cloth
White paint
Brush
lvaste cloth
10.3 Precautions
(1) Prior to disassembly, refer to the instruction manual and the parts list.
(2) Use the right tools, and take care not to scratch the parts or wound yourself.
(3) When driving out a shaft or other parts, use a protective bar or a copper hammer.
(4) Place in order the disassembled parts.
(5) Check 0 marks on coupling, carn gear and crank gcar.
(6) Make proper profision for locking parts \\hich gi|e incidental rotation when other
parts are moled,
(7) Take care not to scratch oil seals and other parts.
(8) For total disassembly, discharge beforehand lube oil, cooling $ater, and fuel from
the crar*case, and from the gear case.
,10.4 Clutch Disassemblv Procedure
13
Step
-?rocedure
TooIs Illustration
1
Remove one cotter pin, one
slotted Dut and one $oodruff
key for shifter.
Pinchers
Spanner 1?
2
Remove the two setbolts for
clutch housinga A and B,
and then two spring
washers by hard.
Spanner 17
3
Detach one slide shaft.
4.
Pry separate the housing B
from the housing A.
Note: Positioning claws and
springs leap out.
Remove three claws and
three spridgE.
(-) Drive