Adjustments; Governor Lever; Adjustment Procedure - Yanmar YSE8 Service Manual

9. ADJUSTMENTS
9.1 Gove.nor Lever
_
9.1.1 Adjustm.nrprocedure
(1) Place the regulator remote clontrol lever
in IiOPERATE' position.
(2) Turn the punch mar.k on the connecting
screw toward the cylinder perpendicularly
to the pump adjusting levea,
*
*
(Note)
Drive in the connecting screw till its bottom comes to the top level of the
pump adJusting lever.
a
( 3 )
(4)
(s)
Lightly screw in the regulator spindle
clockwise,
Tighten the cross-recessed head screw
for ttre pump adiusting lever, a$d tighten
the lock nut on the other side.
I\rrn the corulecting screw (punch mart)
counter-clockwise by 90', then tighten the
lock nut.
(6) a.
Check tbat when the p{rmp adjustiDg lever is pushed to the
regulator spindle moves, boo,
(Temporary high-speed rotation will result if the entsine is
sDindle does not move. )
Note: If the pump adiusting lever moves outside when the connecting screw is hrned by
9f , go back to step (3). After that, if the governor 2nd lever moves inside, the
adiustment is perfect.
cylinder side, the
started while the
Conn@.n! s* stould .or .dn