Neurio W2 Installation Manual page 19

Home energy monitor
Table of Contents

Advertisement

When powered on, Neurio will play the following tones to indicate its status in
sequential order:
TO N E
Short beeps
Short chime
Long beep
Long chime
Neurio joined network
Falling tone
If Neurio is connected to the WiFi network, you should also hear a long chime one minute after the
I N D I CAT I O N
Voltage check
Neurio's WiFi
network started
Voltage warning
(conditional)
successfully
Neurio failed to
join network
short chime.
D E S C R I P T I O N
One beep for each voltage wire that is connected.
For a 2-phase installation there should be two
beeps to indicate that the black and red wires are
connected.
Neurio has started hosting its own WiFi network.
You can join this network to configure Neurio and
connect it to your own WiFi network.
Indicates that two wires are connected to the same
phase. For North American apartments, this means
that one of Neurio's wires should be moved to a
different breaker. This tone can be ignored for all
other 2-phase installations.
Neurio successfully joined your WiFi network.
Neurio was unable to join your WiFi network. Neurio will
now start hosting its own WiFi network again to allow you to
re-connect to Neurio and re-enter the WiFi credentials.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the W2 and is the answer not in the manual?

Related Products for Neurio W2

Table of Contents

Save PDF