Choosing Your Language - JVC Fire TV Edition LT-40CF890 Quick Start Manual

5

Choosing your language

The first time you switch your TV on it will automatically be in the initial setup mode. This will guide you through the whole setup process of selecting your desired
language, connecting to the internet, signing in to your Amazon account and tuning in TV channels.
1. Press the
buttons to highlight
your LANGUAGE then press the
SELECT button.
2. Your remote control should
automatically pair, but if it hasn't
HOME
press and hold the
pair it.
3. Press the SELECT button to continue.
6
Connecting to the Internet - Wired, Wireless or using the WPS button
WIRED Connection
•
If you have connected your ethernet cable to the LAN socket on the back of your TV, your TV will automatically connect to the internet. You'll now be asked to
sign in to your Amazon account, go to section 7.
WIRELESS Connection
You can connect using a wireless connection via your router.
1. Your TV will automatically scan for
your wireless network, then show
you a list of networks that its found.
Highlight your network and press
SELECT
the button.
2. Enter your Wi-Fi password, then
highlight Connect and press the
SELECT button.
In a second or two your TV will show
Connecton Successful.
JVC 40'_49'_55' Amazon Fire LED Smart 4K HDR TV LT-40CF890 LT-49CF890(A) LT-55CF890 Quick Start Guide.indd 4
button to
Best connection
speed
Wireless Router
Maximum distance
5m
Make sure your TV
is as close to your
router as possible,
within 5m and
ideally in the same
room as the TV
Wireless Router
7
13/11/2019 16:08