JVC Fire TV Edition LT-40CF890 Quick Start Manual page 3

4
Connecting the Aerial and Turning on the TV
1. Connect one end of the RF coaxial cable to the aerial socket on the wall and the other end of the cable to the ANT socket on the back of your TV.
2. Plug the TV into a mains socket and switch on at the mains.
3. In standby mode, press the
Router
(not included)
Do not connect the TV to the mains supply until you have completed all the connections.
Always disconnect the TV from the mains socket when not in use for a long period of time.
The button on the remote control is only used for switching the TV into standby, it does not disconnect the TV from the mains power.
To completely disconnect the mains power, please remove the mains plug from the mains socket.
JVC 40'_49'_55' Amazon Fire LED Smart 4K HDR TV LT-40CF890 LT-49CF890(A) LT-55CF890 Quick Start Guide.indd 3
button on the remote control to turn the TV on. The LED indicator will flash for a few seconds then the TV will switch on.
LAN
VGA
SPDIF
Optic.OUT
R L
BACK AV
Optional
If you want to connect to the internet via a wired connection
then connect your ethernet cable to the LAN socket.
LAN
VGA
SPDIF
Optic.OUT
R L VIDEO
BACK AV
VIDEO
RF coaxial cable
(not included)
13/11/2019 16:08