Symbols Used In This Document; General Information; Further Documentation; Warranty - Grundfos Fire HSEF FM Europe Series Installation And Operating Instructions Manual

2. Symbols used in this document

Warning
If these safety instructions are not observed, it may
result in personal injury.
Warning
If these instructions are not observed, it may lead to
electric shock with consequent risk of serious
personal injury or death.
Warning
The surface of the product may be so hot that it may
cause burns or personal injury.
Warning
The sound pressure level is so high that hearing
protection must be used.
If these safety instructions are not observed, it may
Caution
result in malfunction or damage to the equipment.
Notes or instructions that make the job easier and
Note
ensure safe operation.
The instructions below placed on the fire pump set must be
observed and must be legible at all times:
• direction of rotation arrow
• labelling of pipe connections
• stickers with safety instructions.

3. General information

These installation and operating instructions apply to HSEF
pumps approved by FM in accordance with:
• FM class 1311.
Furthermore these installation and operating instructions apply to
fire pump sets in accordance with the following standard:
• NFPA 20.
• FM data sheet 3-7.
The document includes the basic information needed for
operating the complete pump set and the diesel engine.
See also installation and operating instructions for the controller,
engine and coupling.

3.1 Further documentation

This document is to be used together with the following
documentation:
• installation and operating instructions for the controller
• installation and operating instructions for the engine
• installation and operating instructions for the coupling
• wiring diagram for the controller
• installation and operating instructions for the pressure
transmitter
• service instructions for individual components
• data booklet for pump sets
• data booklet for engine.

3.2 Warranty

The warranty is according to our general terms of delivery.
Liability for any damage which is a result of errors during
installation, electrical connection or incorrect use is excluded.
Liability for consequential damage is excluded. The start of the
warranty period is to be verified.
3.2.1 Engine warranty
In order to ensure that warranty issues can be handled correctly,
every engine needs to be registered at the manufacturer's
website.
1. Go to http://www.clarkefire.com/.
2. Choose category "SERVICE, PARTS & WARRANTY".
3. Choose "Warranty".
4. Choose between two categories: either "Clarke/John Deere
Online Warranty Registration" or "Other Engine Manufacturers
Online Warranty Registration" depending on the manufacturer
of the engine. You find the name of the manufacturer on the
nameplate of the engine.
5. Fill out the form.
6. Submit the registration. When the registration is completed
successfully, you will receive an acknowledgement.

3.3 Receipt of product

The pump set is delivered from factory in a wooden crate or in a
closed box made of wood/plywood designed for transportation
with forklift or a similar vehicle.
Check the pump set carefully for transport damage
and missing parts on delivery. Transport and store it
Note
correctly before installation.
3