Sony VX-2100 Manual page 9

Tripod controls
Tilt lock: must be loosened to perform tilting.
Tilt drag: controls the amount of resistance on the tilt.
Pan lock: must be loosened to perform panning.
Pan drag: controls the amount of resistance on the pan.
Column lock: must be loosened to elevate or lower camera.
Pedestal crank: elevates or lowers camera.
Before attempting to perform tilts and pans, be sure locks are loosened. When you leave your po-
sition behind the camera, the tilt lock shold be tightened to prevent camera from falling forward. Locks
only need to be finger tight; do not over-tighten the tripod locks.
Common shots and terminology
(see images on next page)
Wide shot (WS): used to show environment. Begin a scene with a wide shot to establish the setting
for the viewer; then cut in to a medium shot, then to close-ups for details.
Medium shot (MS): head and shoulders with chest.
Medium close-up (MCU): head and top of shoulders only.
Close-up (CU): head only; used to show detail or convey emotion on a face.
Extreme close-up (ECU): area of the face from the eyes to the mouth; used to show extreme detail
and/or emotion.
Head room: amount of empty space above the top of the head.
Lead room (or nose room): amount of empty space in front of the subject on the side that they are
facing.
Two-shot: framed to show two people together.
Three-shot: framed to show three people together.
Point-of-view (POV): we see the world through the subject's eyes.
Over-the-shoulder shot (OSS): reverse angle from behind the subject.
Dutch angle or canted angle: camera/tripod is deliberately set at an angle that is not level. It can be
artsy, but be careful not to overuse.
8