Sony VX-2100 Manual page 5

Manually adjusting focus
In AUTO mode, the focus may change erratically as subjects move toward or away from the lens. To
alleviate this, set the focus manually:
You can also shoot with auto focusing momentarily by pressing PUSH AUTO. Use this button to focus
on one subject and then another quickly with smooth focusing. When you release PUSH AUTO, manual
focusing resumes.
Manually adjusting white balance
In most cases, the camera does a good job of white balance in AUTO mode. To manually adjust the
white balance:
1. Set the AUTO LOCK
selector to the center.
2. Press WHT BAL. The
white balance indicator
appears on the screen.
3. Turn the SEL/PUSH
EXEC dial to select the
appropriate white balance
mode:
One push white balance: aim at a white object (such as a sheet of paper), then press the SEL/PUSH
EXEC dial. The white balance indicator flashes quickly. When it stops flashing, the white balance has
been set.
OR
Presets: Turn the SEL/PUSH EXEC dial to select OUTDOOR mode for shooting in sunlight. Turn the
SEL/PUSH EXEC dial to select INDOOR mode for shooting in tungsten light given off by incandescent
light bulbs.
4
1. Slide FOCUS down to
MANUAL.
2. Zoom all the way in on
your subject and turn the
focus ring until a sharp
image appears.
3. Zoom out to frame up
your shot.