Alemite 9950-A Service Manual

1-800-548-1191-http://www.partdeal.com-info@partdeal.com
High-Pressure Pump (Stationary and Portable)
Description
The major components of the high-pressure pump
assembly in the 9950-A and 9951 model series consist of
a(n):
• air-operated motor
• single-acting reciprocating pump tube
• cover assembly
• follower plate
• control valve, z-swivel, and hose (Model 9951 series)
• dolly ((Model 9951)
• two-wheel hand truck (Model 9951-T)
Pump Assembly
The high-pressure (50:1 ratio) pump included with the
assembly is designed to deliver a range of greases
[up to NLGI # 3] and operate directly from their original
120-pound container.
Models 9950-A and 9951 Series
Each model in the 9951 series includes a control valve,
z-swivel, and delivery hose.
Portable
Model 9951 also includes a dolly while model 9951-T
is equipped with a hand truck.
Stationary
Model 9950-A is stationary. See Figure 1.
Specifications
IMPORTANT: For detailed information on
the pump tube (including specifications and
performance data) refer to SER 9911/9950.
For information on the motor, please refer to
SER 339413.
This document contains confidential information that is the property of Alemite Corporation
670793
and is not to be copied, used, or disclosed to others without express written permission.
Service Guide
Alemite Corporation
PO Box 473515, Charlotte, North Carolina 28247-3515
www.alemite.com
©
Copyright 2000 by Alemite Corporation
Control
Pump
Valve,
Dolly
Swivel
Model Truck
& Hose
9950-A
9951
9951-S
9951-T
Figure 1 High-Pressure Pump
Models 9950-A and 9951 Series - Model 9951-T Shown
9950-A
9951
9951-S
9951-T
Width x Height
Hand
(including container)
Inches Cm
15 x 36-1/2 38.1 x 92.7
20-1/4 x 39 51.4 x 99.1
15 x 36-1/2 38.1 x 92.7
15 x 38 38.1 x 96.5
SER 9950-A
Revision (1-00)