Selecting units
Selecting units
You can specify the display units of the
MFD.
After entering
mode you can scroll through the following
options by briefly pressing the MFD button
A - see page 4:
Metric or U.S.
VALUE
END
Whether Metric or U.S. or DEFAULT or
USER is displayed is dependent on the
previous setting.
Press the MFD button A - see page 4 -
once long and then once short while in the
display Metric or U.S. Now you can select
the following items by briefly pressing the
MFD button A - see page 4:
Metric
U.S.
Pressing the MFA button A longer - see
page 4 - selects Metric or U.S.. Then you
move to the End display by pressing briefly
and complete the entry by pressing the
button longer.
1)
Irrelevant in the current software version
1.06.
CONTROLS AND EQUIPMENT
1)
1)
the
programming
DEFAULT or USER
End
CONTROLS AND EQUIPMENT
Selecting profile
Selecting profile
You can choose from two MFD profiles.
After entering
mode you can scroll through the following
options by briefly pressing the MFD button
A - see page 4:
Metric or U.S.
VALUE
END
Whether Metric or U.S. or DEFAULT or
USER is displayed is dependent on the
previous setting.
Press the MFD button A - see page 4 -
once long and then once short while in the
display DEFAULT or USER. Now you can
select the following items by briefly pres-
sing the MFD button A - see page 4:
DEFAULT
USER
By pressing the MFD button A longer - see
page 4 - you select DEFAULT or USER
(depending on which profile you want to
display). Then you move to the End display
by pressing briefly repeatedly and complete
the entry by pressing the button longer.
Scroll to the display End again and press
the button longer.
the
programming
DEFAULT or USER
End
5
5