Selecting Display Options In A Profile - Volkswagen Marine SDI Series Additional Operating Manual

CONTROLS AND EQUIPMENT

Selecting display options in a profile

You can specify the menu items to be
displayed in each profile.
After entering
mode you can scroll through the following
options by briefly pressing the MFD button
A:
Metric or U.S.
VALUE END
Whether Metric or U.S. or DEFAULT or
USER is displayed is dependent on the
previous setting.
6
6
A
BM5-010M
the programming
DEFAULT or USER
Press the MFD button A once long and then
once short while in the display DEFAULT
or USER. Now you can select the following
items by briefly pressing the MFD button A:
DEFAULT USER
By pressing the MFD button A longer you
select DEFAULT or USER (depending on
which profile you want to display). Then the
individual menu items are scrolled further
each time you press the button briefly. For
rows of menu items as specified in Over-
view of possible display options, see
page 3.
Selected items are marked with an asterisk
(*). Switching between menu items
selected and those not selected is carried
out by pressing the MFD button A longer in
each case. Briefly pressing the button
advances to the next display option. Finally,
the menu item End must be confirmed by
pressing the button longer.
CONTROLS AND EQUIPMENT
End