The Default And User Profiles; Entering The Programming Mode - Volkswagen Marine SDI Series Additional Operating Manual

CONTROLS AND EQUIPMENT
The profiles
DEFAULT and USER
The multi-function display offers you two
settable profiles for the selection of the
options to be displayed.
These profiles are called DEFAULT and
USER. You can change each of these
profiles, i.e. you can save the displays you
desire in these profiles.
4
4
Entering the
programming mode
Section from flybridge panel
1
Ignition switch in flybridge panel
Press and hold button A for the MFD while
turning the ignition key twice to position 2.
Depending on the previous selection, the
display Metric or U.S. appears.
CONTROLS AND EQUIPMENT
A
BM5-010M
2
3
BM5-019M