IBM 3197 D Setup Instructions page 67

(
(\
8.3.3 Press and hold both the Shift key and the Set Address 2 (F24/F12) key until the Station Address 2
(a number 0 through 6) that you previously recorded on the front of your IBM 3197 Problem
Solving Guide appears at the right of the Terminal Mode indicator ,,- -;- .. and then release the
F24/F12 key and the Shift key.
o
10-02--
'---------~
8.3.4 Press and hold the Shift key and then press the SetUp key.
Station Address 2
(Examplej
Display Station Addresses 1 and 2 are now set and remain the same until you change them.
Section 8. Selecting Your Terminal Mode (IBM Enhanced Keyboard)
63