Makita PV7000C Technical Information page 4

R
epair
<2> Assembling gear and ball bearing
(1) Assemble oil seal to bearing retainer. And then, assemble spindle to the bearing retainer
as illustrated in Fig.4.
(2) Assemble spindle to ball bearing 6201DDW by pressing it as illustrated in Fig.5.
The cut portion has to be
faced to pad / disc installing side.
Apply some grease to the
inside of lip portion.
(3) Insert the spindle into gear housing as illustrated in Fig.6. And then, screw bearing retainer anti-clockwise
into gear housing as illustrated in fig. 7.
Bearing retainer
with oil seal
Ball bearing
6201DDW
(4) Place the gear housing on
to spindle as illustrated in Fig. 8.
No.1R036 Bearing Setting Plate
Bearing retainer
Oil seal
Fig.4
Spindle
Fig.6
No.1R036 "bearing setting plate"
A : 17.2mm
A
1R036 Bearing Setting
Plate
Bearing retainer
with oil seal
Ball bearing
6201DDW
1R043
Wrench for Bearing retainer
Turn anti-clockwise.
And then, assemble sleeve 12 and helical gear
Press
Helical gear
Sleeve 12
Fig.8
Press the spindle.
Fig.5
Fig.7
Spindle
P 4 / 15