Advertisement
Table of Contents
How can I verify the Hercules P32DJ is working correctly as a MIDI controller
(MAC)?
There is many ways to test the Hercules P32DJ as a MIDI controller. The first one is
included with MAC OS:
- Open Audio/MIDI Setup (Application > Utilities).
Under Window >MIDI Studio, you should find Hercules P32DJ.
- Click on
Press a button on the controller. You should normally obtain de following result,
indicating the controller correctly transmits a signal:
Even though it might not be very precise, this is an easy way to verify the transmission
of MIDI Messages. For a more detailed analysis, we'll use a MIDI test program available
from the following website:
MIDI Monitor
http://www.snoize.com/MIDIMonitor/
®
Hercules
Technical support
- 1 -
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hercules P32DJ
Summary of Contents for Hercules P32DJ
- Page 1 How can I verify the Hercules P32DJ is working correctly as a MIDI controller (MAC)? There is many ways to test the Hercules P32DJ as a MIDI controller. The first one is included with MAC OS: - Open Audio/MIDI Setup (Application > Utilities).
- Page 2 Once installed, the first thing to do when launching MIDI Monitor, is to check under Sources, that Hercules P32DJ is enumerated: Start by pressing a button on the DJ Control. Under column Data, you will notice a value of 127 (when pressing the button) and 0 (when releasing the button).
Need help?
Do you have a question about the P32DJ and is the answer not in the manual?
Questions and answers