Table of Contents
Advertisement
How to use the buttons
4. How to use the buttons
8
Auto operation
Ensure the power supply is on and all interconnecting wires are
connected. The OPERATION indicator on the display panel of
the indoor unit starts flashing.
Press the MODE button to select Auto.
1
Press the UP/DOWN button to set the desired
2
temperature. The temperature can be set within a range of
17ºC~ 30ºC in 1ºC increments.
Press the ON/OFF button to start the air conditioner.
3
NOTE
In the Auto mode, the air conditioner can logically choose
1
the mode of Cooling, Fan, and Heating by sensing the
difference between the actual ambient room temperature
and the setting temperature on the remote controller.
In the Auto mode, you can not switch the fan speed.
2
It is automatically controlled.
If the Auto mode is not comfortable for you, the desired
3
mode can be selected manually.
Cooling /Heating/Fan operation
Ensure the power supply is on and all interconnecting wires are
connected.
Press the MODE button to select COOL, HEAT (cooling
1
& heating models only) or FAN mode.
Press the UP/DOWN buttons to set the desired
2
temperature. The temperature can be set within a range of
17ºC ~ 30ºC in 1ºC increments.
Press the FAN button to select the fan speed in four steps:
3
Auto, Low, Med, or High.
Press the ON/OFF button to start the air conditioner.
4
NOTE
In the FAN mode, the setting temperature is not displayed
in the remote controller and you are not able to control the
room temperature either. In this case, only step 1, 3 and 4
may be performed.
Climate 5000 – 6 720 866 393 (2019/11)
Hide quick links:
Advertisement
Table of Contents
