Configuration In Ibapda-V6 - IBA ibaBM-COL-8i-o Manual

Manual ibaBM-COL-8i-o
5.3

Configuration in ibaPDA-V6

If the device is connected to the ibaPDA-V6 system, then it is automatically detected by
the software. The devices connected to ibaBM-COL-8i-o on the input links are also
detected.
In the I/O manager of ibaPDA-V6 the device is represented in the signal tree as shown
on the picture below.
If the device is highlighted in the signal tree, you can specify a name for the device in
the dialog on the right. All further fields in the dialog are designed only for information
purposes.
The "Sync source" field displays the fiber optic link which is used for the
synchronization of the device or clocking of the output link. Usually it is the 1st link
which receives a valid and active signal.
The information fields for the 8 input links (link 0 to link 7) indicate the current status of
the coupling.
Besides the color identification according to LEDs L30 to L37 on the device you will be
informed if the connection is functioning without errors (yellow) or not (gray). There is
no blinking status, for example like for the LED. Besides it is displayed what input data
rate is used and what is the type of these data (integer or real).
16 Issue 1.1