Hardware Connection Without Using Iba Software - IBA ibaBM-COL-8i-o Manual

5.2.3

Hardware connection without using iba Software

The figure below shows for example how 2 automation systems can exchange data via
a mere hardware connection. There is no need for an iba software application.
The bidirectional data exchange between an ABB AC 800PEC controller and a
SIMADYN D 16bit system is realized by a combination of ibaLink-SM-64-SD16 system
interface boards and the devices ibaBM-COL-8i-o and ibaBM-DIS-i-8o.
Note
Up to 8 ibaLink-SM-64-SD16-boards can be used.
Software STRUC, version 2.6 or higher is required.
Figure 7:
14
Hardware connection without using iba Software
Manual
Issue 1.1
ibaBM-COL-8i-o