Table of Contents
Advertisement
LAUNCH
automatically test the aligning angles with high
performance camera.
Positive
targets:
components inside the targets, and no cables
between the targets and the main unit, so the
targets are easy to be fastened on the wheel
clamps.
Provides many kinds of auto test processes and
diagram operating interfaces, very simple and
clear to operate; the whole test process can be
performed automatically, and there are some
humanity tips on the corresponding interfaces.
Specification
Total toe-in
Camber
Caster
Steering axle inclination
Maximal rim size
Notes:
1.
The right of changing the design will be reserved by manufacturer;
2.
The above accuracy can be confirmed only when the user follows the specified operation procedures.
Requirements on Surroundings
Item
Ambient temperature
Relative humidity
Light requirement
The height difference between the left rail and
right rail of lift
Working Principle
The working framework of KWA-300 3D Wheel Aligner is as shown in Fig.1.9. The whole system is composed of data
collecting system and data processing system.
KWA-300 3D Wheel Aligner
there
are
no
electronic
Item
0~+50℃
≤85%
No direct strong lights irradiate the target and reflect to the camera
<1mm (left to right); <2mm (front to back)
Complete databank: wheel alignment data of over
20,000 vehicle models is stored in the system.
User can also add new data to the databank.
Automatically record the history data, easy for
customer measurement.
Profuse vehicle adjustment animation and HELP
information.
Provide real-time help with help system.
Provide the function of data back-up and
restoration, and of software upgrade.
Resolution
2'
2'
4'
4'
Depending on the size of the
Specification
1-4
Introduction
Test Range
0~±20º
0~±20º
0~±25º
0~±25º
wheel clamp
Advertisement
Table of Contents
