Summary of Contents for National Instruments NI PS-14
Page 1
INSTALLATION GUIDE NI PS-14/15/16/17 Panel Mount Brackets This document provides the installation procedure for the NI PS-14/15/16/17 Panel Mount Brackets. Use accessory 199432-01 to mount NI PS-14/15/16/17 power supplies without using a DIN-Rail. Bracket and Mounting Dimensions This section provides dimensions for the brackets and the finished assemblies when the brackets are attached to the power supply.
Page 2
N L PE Figure 2 provides the dimensions for each bracket. Figure 2. Panel Mount Bracket Dimensions Weight ...............25 g (0.06 lb) each 50 g (0.11 lb) for one set 2 | ni.com | NI PS-14/15/16/17 Panel Mount Brackets Installation Guide...
Page 4
Detach the plastic slider, as shown in Figure 4. Figure 4. Removing the Plastic Slider Do not over-tighten the screws. The recommended tightening torque is Caution 0.6 Nm/5.3 lb in. 4 | ni.com | NI PS-14/15/16/17 Panel Mount Brackets Installation Guide...
NI. National Instruments corporate headquarters is located at 11500 North Mopac Expressway, Austin, Texas, 78759-3504. National Instruments also has offices located around the world. For telephone support in the United States, create your service request at or dial ni.com/support...