LG TCH-M550 Owner's Manual page 15

Radio Operation
otes
• The presetting is not performed if there
is no station to be tuned in.
• When the automatic presetting is
performed, the previously preset
stations are automatically erased.
• To stop the automatic presetting, press
AS/PS (auto store/preset scan) again
or press any of the preset station
buttons (1 - 6)
To scan the preset stations
Press AS/PS (auto store/preset scan)
button briefly.
Each preset station is tuned in for
5 seconds in order.
To stop the scanning, press AS/PS again
or any of the preset station buttons
(1 - 6).
To tune in the preset stations
Press BAND to select the desired band
and press the desired preset station
buttons (1 - 6).
The number of the preset station
button is displayed and the preset
station is received.
.
Listening to the radio
a Press any button (except
) to turn
on the unit.
The radio frequency is displayed.
If the unit is in the CD operation,
press FUNCTION (FUNC) to select
the radio operation.
b Press BAND to select the desired
band.
The band indicator F1, F2, F3, MW
is displayed.
c Press TUNE(+) to increase and
TUNE(-) to decrease the frequency.
To change the frequency rapidly,
press and hold TUNE(-/+) down
longer.
15
Seek Tuning
The seek function is used to search for
the station automatically.
• Press SEEK(+/-) to start the seek
function.
• Press SEEK(+) to search for the
higher frequencies and SEEK(-) for the
lower frequencies.
The seeking stops when the nearest
station with good reception is tuned in.
• Press SEEK(+/-) repeatedly until
desired station is received.