Install Network Validation Tool; Install The Rails - Dell EMC DP4400 Installation Manual

Table 1 IP address range assignments (continued)
IP Range
Allocation
+5
+6
+7
+8
+9
+10
The following three IP addresses are required for additional connectivity, but are not configured as
a part of the range.
Table 2 Additional IP addresses
Component
ESXi
Appliance Configuration
Manager (ACM)
iDRAC

Install Network Validation Tool

The Network Validation Tool (NVT) for IDPA runs multiple automated tests to validate the network
configuration. You must run the NVT for IDPA from a system on the management network.
Before you install IDPA, network configuration must be completed for the datacenter. After the
network configuration is complete, you must install and run the Network Validation Tool to validate
the network configuration for a successful deployment of IDPA in the datacenter. To download the
NVT, and for more information about NVT, see
Network+Validation+Tool+for+IDPA.

Install the rails

About this task
The rails are labeled left and right, and cannot be interchanged. The front side of each rail is
labeled Left Front or Right Front when the rail faces the cabinet front.
Component
Avamar
IDPA System Manager
Data Protection Advisor
Data Protection Advisor
Data Protection Search
DD Cloud DR CDRA
(optional)
Description
VMware ESXi
ACM VM
Integrated Dell Remote
Access Controller
Dell EMC Integrated Data Protection Appliance DP4400 2.3 Installation Guide
Description
Avamar Proxy VM
IDPA System Manager
VM
Application Server Host
VM
Datastore Server Host
VM
Index Master Node Host
VM
Data Domain Cloud
Disaster Recovery (DD
Cloud DR) Cloud DR
Add-on (CDRA) virtual
appliance
Sample Hostname
idpa-esxi.domain.local
idpa-acm.domain.local
idpa-idrac.domain.local
https://help.psapps.emc.com/display/HELP/
Sample Hostname
idpa-
avproxy.domain.local
idpa-sysmgr.domain.local
idpa-dpa1.domain.local
idpa-dpa2.domain.local
idpa-search.domain.local
idpa-cdra.domain.local
5