Related Manuals for omisa 7125/LI
Summary of Contents for omisa 7125/LI
- Page 1 Version 1/2013 USE AND MAINTENANCE INSTRUCTION MANUAL Machine type: 7125/LI Serial number: Year of manufacture: 2020...
- Page 2 Version 1/2013 INTENTIONALLY LEFT BLANK...
- Page 3 Version 1/2013 Dear costumer, Thanks for having chosen this product! This instruction manual has been prepared in order to fully appreciate the high quality of our product. Inside you will find all the necessary information and warnings for a safe and proper use. We want to advise you to read it before proceeding with the operations.
-
Page 4: Table Of Contents
Version 1/2013 INDEX INDEX _______________________________________________________ 4 LIMITED WARRANTY ___________________________________________ 5 RETURNS OF GOODS __________________________________________ 5 DISCLAIMER OF LIABILITY ______________________________________ 5 PRODUCT IMPROVEMENT ______________________________________ 5 GENERAL DESCRIPTION OF WELDING MACHINE ___________________ 6 GENERAL WELDING CRITERIA – OPTIMAL USE _____________________ 8 SAFETY ALERTS _____________________________________________ 10 READ AND UNDERSTAND ______________________________________ 11 GENERAL SAFETY ____________________________________________ 11 WEAR SAFETY EQUIPMENT ____________________________________ 12... -
Page 5: Limited Warranty
Version 1/2013 LIMITED WARRANTY The manufacturer warrants all its manufactured, sold and repaired products to be free from defects in materials and workmanship. The manufacturer obligation under this warranty is limited to free reparation or free replacement at its factory, within 2 years after shipment, except for purchased items by third parties (e.g. -
Page 6: General Description Of Welding Machine
Version 1/2013 GENERAL DESCRIPTION OF WELDING MACHINE The machine is mainly composed by:... - Page 7 Version 1/2013 1 - BASIC MACHINE The carriage assembly consists of one fixed jaw and two mechanically operated movable jaws. It is composed by an aluminium support frame, suitably treated to be resistant to atmospheric agents, which acts as a guide, on which runs a slide to which it is firmly anchored in the fitting (pipe).
-
Page 8: General Welding Criteria - Optimal Use
The welding operation with the machine ART. 7125/LI is done inserting the pipe inside the fitting, after heating the outside part of pipe and the inner part of fitting for a stated period of time, by using the extractable polywelder 10125/TF with bushes. - Page 9 Version 1/2013 TECHNICAL FEATURES: Ø32 – Ø125 Welding capacity: Weight with battery and yokes: approx. 12.5kg Weight complete set: approx. 17.5kg Outer dimension: approx 455 x 390 x 265 mm Length of machine: approx 450 mm Height of machine with yokes: approx.
-
Page 10: Safety Alerts
Version 1/2013 SAFETY ALERTS This hazard alert signal appears in this instruction manual. When you see this signal, carefully read its meaning. YOUR SAFETY IS AT STAKE. The hazard alert signal is usually accompanied by these words: DANGER, WARNING and CAUTION. DANGER Indicates a hazardous situation that, if not avoided, will result in death or seriously... -
Page 11: Read And Understand
Version 1/2013 READ AND UNDERSTAND Do not operate this equipment until you have carefully read and understand all sections of this manual, and all other equipment manuals which will be used with it.This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge... -
Page 12: Wear Safety Equipment
Version 1/2013 WEAR SAFETY EQUIPMENT Wear a hard hat, safety shoes, safety glasses other applicable personal protective equipment. Remove jewellery and rings and do not wear loose-fitting clothing or long hair that could catch on controls or moving machinery. HEATER IS NOT EXPLOSION PROOF This heater is not explosion proof. -
Page 13: Crush Points
Version 1/2013 CRUSH POINTS Mechanical operated equipment generate very high force. Anything caught in the machine will be crushed. Keep fingers, feet, arms, legs, and head out of the machine while operating. HEATER IS HOT The heater is hot and will burn clothing and skin. Keep the heater in its insulated heater stand or blanket when not in use, and pay attention when heating the pipe. -
Page 14: Overview
Version 1/2013 OVERVIEW WHAT IS HEAT FUSION The principle of heat fusion is to heat two surfaces to a designated temperature and then fuse them together by application of force. This pressure causes flow of the melted materials, which brings on mixing and so the fusion. -
Page 15: Operation
Version 1/2013 OPERATION LOADING PIPE AND FITTING INTO MACHINE Clean the inside and the outside of pipe ends and fitting that are to be fused. Insert the pipe and adjust the position with appropriate tool. Insert the fitting in the other side of the machine. Place the proper locks at the end of the fitting, to ensure stability. -
Page 16: Heating The Pipe And Fitting
Version 1/2013 HEATING THE PIPE AND FITTING Fit the polywelder between pipe and fitting and start to put towards the yokes acting on rotary hammer. Mechanical operated equipment generates very high force. Everything caught in the machine will be crushed. Keep fingers, feet, arms, legs, and head out of the machine while operating. -
Page 17: Scheduled Maintenance
THE FEEDING CABLE FROM THE ELECTRICAL SUPPLY. CONTRARY DIRECTION IN USING THE MACHINE The welding machine 7125/LI was designed and manufactured for socket welding of pipes and / or fittings in thermoplastic material and for stated dimension of them. So, it should NOT be used for jointing other materials or for any other uses. -
Page 18: Disposal
Version 1/2013 DISPOSAL As the machine is manufactured by normal metal material, in case of scrapping, it will be needed only to deliver it to an authorized scrapping component separating centre. Components that comes with the picture shown here at the right side, meaning waste of electric and electronic equipment, have to be disposed separately by authorized collection.
Need help?
Do you have a question about the 7125/LI and is the answer not in the manual?
Questions and answers