Advertisement
each end and locate wire end. When
both probes are connected to the same
wire, both ends will ring.
)
Turn off unit when conversation is
concluded by pressing "OFF" button.
Unit will turn off after approximately one
hour if no button is pressed. Pressing
"ON" will restore power.
Application Hints:
The side tone (feedback from the
microphone to the earpiece) level will be
very high if there is no Talk-N-Trace™
connected to the other end of the line (it
does not matter if other Talk-N-Trace™ is on
or off).
When a Talk-N-Trace™ is ringing, the ringer
can be silenced by pressing the "ON" button.
The Talk-N-Trace™ will also power up if it
was off.
The over the ear headset provided with the
Talk-N-Trace™' can be used with either ear.
The microphone rotates with respect to the
earpiece to be in the proper position on the
left or right side.
Most cell phone headsets with a 2.5mm plug
will work on the Talk-N-trace™, should the
user prefer a different style headset.
5
Advertisement
