Download Print this page

JDS Uniphase Talk-N-Trace TM-110 User Manual page 3

Communication and tracing set

Advertisement

RJ 11/12
CONNECTOR
Talk Jack for
communication
BATTERY LOW
INDICATOR
This LED will light
and stay on while
the talk circuits
are on when the
battery voltage is
too low.
OFF BUTTON
Pressing this
button turns
off the power
to the talk
circuitry.
ON / RING BUTTON
When unit is off, pressing this button turns
on power to talk circuitry.
When unit on, pressing this button causes
the ringers on the other end(s) of the wire to
ring as long as the button is held down/up to
approx. 15 secretary.
Pressing this button while your set is ringing
stops the ring and turns on the unit if it is off.
BATTERY ACCESS CAP
BELT CLIP
(on back of unit)
HI / NORMAL
SLIDE SWITCH
Adjusts the
headset volume
BANANA JACK
(1-RED/ 1-
BLACK)
Trace Jack for
locating wire

Advertisement

loading