Advertisement
Trace Features
An identification (ID) banana jack is located
on the side opposite the RJ jack to facilitate
the identification of wires while two Talk-
N-Trace™ units are connected together
by a communications pair. A standard test
lead set has been included to connect the
banana jacks to wires to be tested. When
both ends of a wire are touched with the
test leads on the Talk-N-Trace™, the ringers
on both units sound indicating that the
same wire has been located at both ends.
The ringing continues as long as there
is continuity between the two ID banana
jacks. Normal conversation between the two
ends continues whether or not there is a
connection between the ID jacks. The Talk-
N-Trace™ units must be used in pairs. One
unit with a red banana jack and the other
unit with a black banana jack are required.
Advertisement
