Global Water FP111 User Manual page 11

Global Water
800-876-1172 • globalw.com
Setup Menu
To enter the setup menu, press and hold the MENU button for 2
seconds. Each press of the MENU button cycles through 1 of 4
options, Press BACK at any time to return to the main display mode.
The 4 menu options are View data, Delete All Data, Set Velocity Units
and Set Calibration Number; press SET to enter the setup screen for
the current menu function.
View Data Delete All Set Units Set Cal
View Data
From the View Data menu screen, press SET
to review recorded data.
The memory location is shown in the upper
display and the data is shown in the lower
larger display. Use the UP and DOWN arrow
buttons to change the memory location you
wish to view. Use the MODE button to select
the average, minimum or maximum data value for
the selected memory location. The AVG, MIN or MAX icon is shown
at the far right to indicate which data value is being displayed, AVG in
the example shown. Press the SET button to return to the menu
display.
11