Global Water FP111 User Manual page 10

Global Water
800-876-1172 • globalw.com
last reset. Press the RESET button when beginning to take any new
measurement.
Save to Memory
When the SAVE button is pressed, the save
data screen is displayed and the function of
the buttons is changed. In this mode, the
averaging and accumulation of minimum
and maximum values is halted. The upper
display shows the next empty memory
location, in this case 024. The lower display
shows the current average reading. Press the
BACK button to return to the main display mode
without saving and resume data collection where it left off. Pressing
the SET button stores the current parameters to the memory location
shown in the upper display and the computer returns to the main
display mode; automatically resetting the average, minimum and
maximum values.
The memory location is automatically incremented. That is, if data is
saved to location 024, the next time SAVE is pressed the location will
show 025. There are a total of 30 memory locations. Once data is
saved to location 030, the next save function will wrap around back to
location 001, take care to not overwrite previously saved data. If you
do not want to store data into the location shown, use the UP and
DOWN arrow buttons to select the desired memory location before
pressing SET. If there is already data stored in a particular memory
location, pressing SET will overwrite the old data with the new data
and no warning will be given.
10