Recording Function For Multi-Use - Kenwood TS-990S In-Depth Manual

07 SOFTWARE
Recording Function for Multi‑use
For example, in the case where you missed hearing the callsign or when you are not confident in a callback, the constant
recording is convenient for recording of audio that can be played back later. Pressing and holding the [REC] key saves
the latest communication for up to 30 seconds into an audio file that can be played back later.
The recording function can also be used as a general‑use recorder. For recording and playing back by a press of the
[REC] key and [STOP] key, use the internal memory or a USB flash drive. With the internal memory, a maximum of
30 seconds of audio signal can be recorded in one file, and with a USB flash drive, a maximum of nine hours. (For the
9‑hour long‑time recording, at least four gigabytes of free space required.)
Past
Fig. 115 Recording with a Long Press of the [REC] Key (Full‑time Recording)
Short press of [REC] key
Those functions, such as "Voice Message" which is useful in a contest, timer recording, and other various recording
functions, are implemented for variety of your operations.
Note:
◆ The audio file saved into the internal memory can be copied to a USB flash drive. Audio files saved into a USB flash drive
have properties of PCM, 16 kHz, 16 bits, stereo, and .wav extension defined as WAVE format. KENWOOD does not warrant
that the TS‑990S can play back files created or edited on a PC.
68
Recorded Voice
Approximately 30 s
Recorded Voice
(in the internal memory)
Max. recording time of 30 s per recording
Recorded Voice
(in the USB flash drive)
Max. recording time of 9 hours per recording
Fig. 116 Recording by Standard Operation
Press of [REC] key
Present Time
Press of [Stop] key
Time
Elapse
Press of [Stop] key
Time Elapse