Advertisement
General Information, Dimensions and Specifications
• Bed is designed to be used with a standard queen mattress 60 – 80 lbs. (customer supplied)
• Cabinet and front panel should be constructed of 3/4" (19 mm) particle board or material of equal weight so
bed mechanism is properly balanced. Approximate weight of front panel should = 100 lbs.
• Total weight of both mattress and front panel needs to be between 160 – 180 lbs. for bed to work properly. If weight is less
an additional counter-balance may have to be added (provided by end user). Gas pistons cannot be adjusted for weight variations.
• Inside cabinet dimensions must be observed and square before installation of frame. See Dia. A.
• Toekick heights from 3" – 3 3/4" (75 – 95 mm) and must be beveled approx. 45º as in Dia. B.
• Bed cabinet must be securely fastened to wall to guard against tipping. Use the included safety wall mounting brackets
• Material: steel; Color: black lacquer
Slats: wood, elm
Feet: steel; Color: silver
Parts List:
• 2 Safety-right angle-wall mounting brackets w/bolts
• 2 Mounting brackets
• 4 Z-brackets for mounting front panel to frame
• 1 Chrome-plated mattress stop
• 6 Mattress straps (3 curved clasps and 3 flat clasps)
• Appropriate bolts, nuts and screws
1584
(62 3/8")
2145
(84 7/16")
75–95 (3-3 3/4")
Toekick height
Plinth height
Diagram A
Inside Cabinet Measurements:
Vertical Height: 2145 mm (84 7/16")
Depth:
*470 mm (18 1/2") min.
Width:
1584 mm (62 3/8")
*Min. depth 470 (18 1/2") based
on a 203 (8") thick mattress
Space required in front of bed
1852
(72 15/16")
approx.
310
(12 1/2")
approx.
w/o mattress
19
approx. 45º
Bottom Panel
Diagram B
Clearance
Toe Kick
Advertisement
