Turning On The Pager; Turning Off The Pager - Alert-it Companion Mini Handbook

Turning on the Pager

To turn the Pager on, press and hold the ON/OFF button for 3 seconds.
The pager will beep and all three LEDs will flash. The green Pager LED
will blip every 8 seconds to show that the pager is awake and listening
for alarm signals.
If the monitor is turned on, you now see the red Monitor LED on the
`
pager blip every 8 seconds.
Pair/Mute
Monitor LED

Turning off the Pager

To turn the pager off, press and hold the On / Off button for
3 seconds. The pager will bleep and all three LEDs will
flash 3 times.
PLEASE NOTE:
While the pager is shipped with
some charge in the batteries, it is
recommended that the pager is
charged before use.
Alarm LED
Pager LED
On / Off
Figure 2
7