Opening In Situ - Alert-it Companion Mini Handbook

Opening Unit in Situ
If the unit has been mounted to a flat surface using screws, remove the top by inserting the tip of a flat-headed
screwdriver into the slot next to the USB connector, applying gentle pressure and twisting. See figures 7 & 8.
Figure 7
Warranty Information
For 3 years from the date of purchase of the initial equipment, Alert-iT will offer you;
Access to support between the hours of 9.00am and 5.00pm each weekday (excluding Public Holidays) via the
`
telephone help-line for the purposes of fault diagnosis and the provision of advice.
Repair (or if this is not possible-replacement) of faulty equipment free of charge, however, the equipment must
`
be returned to Alert-iT at your own expense.
After inspection by Alert-iT engineers, any equipment that is deemed to have been damaged, rather than
`
failing due to a technical fault will only be repaired after you have agreed to being invoiced for the cost of
repairs and delivery.
This agreement will terminate 3 years after the initial date
`
of purchase, regardless of any new equipment being
issued in the interim period.
Please note that liquid ingress voids warranty.
NOTE:
For those requiring support outside of
Alert-iT's office hours, please contact our
sales team and ask about our Premium
support packages.
14
Figure 8