Mitsubishi Electric MDS-B-SPJ2 Series Specification Manual page 33

● SJ-PF2.2-01
Terminal box
Exhaust
Cooling fan
M8 screw
(2 places marked with ※.)
Note 1. Leave 30mm or more between the cooling fan and
the wall.
Note 2. The vertical shaft can also be installed on the
bottom. (Use the screws marked with a
Note 3. When removing the suspension bolts during use,
close the screw hole with a bolt (M8 × 10 or less).
Terminal box
Exhaust
Cooling fan
M8 screw
(2 places marked with ※.)
Note 1. Leave 30mm or more between the cooling fan and
the wall.
Note 2. The vertical shaft can also be installed on the
bottom. (Use the screws marked with a
Note 3. When removing the suspension bolts during use,
close the screw hole with a bolt (M8 × 10 or less).
2. Specifications
The terminal box lead outlet can
be changed to the left or right.
Rating
nameplate
Suspension bolt
(M8 screw)
Suction
.)
※
Cross-section AA
The terminal box lead outlet can
be changed to the left or right.
Rating
nameplate
Suspension bolt
(M8 screw)
Speed detector connector
Suction
.)
※
Cross-section AA
Speed detector connector
2-M6 screw, depth 10
2-M6 screw, depth 10
2 − 12
Ground
(M5 screw)
Cooling fan motor
BU,BV
(M4 screw)
Motor U, V, W
(M4 screw)
( )
flange
2-M8 screw
Shaft end details
Ground
(M5 screw)
Cooling fan motor
BU,BV
(M4 screw)
Motor U, V, W
(M4 screw)
Shaft end details
A90F
A90T