To Lock The Vehicle - Dodge Challenger 2019 Quick Reference Manual

Hide thumbs Also See for Challenger 2019:
Table of Contents

Advertisement

• With a valid Keyless Enter-N-Go key fob located
outside the vehicle and within 5 ft (1.5 m) of
the driver or passenger side door handle, grab
either front door handle to unlock the door
automatically.

To Lock The Vehicle

• Both front door handles have buttons located
on the outside of the handle. With one of the
vehicle's Keyless Enter-N-Go key fobs located
outside the vehicle and within 5 ft (1.5 m) of
the driver's or passenger front door handle,
push the door handle button to lock the two
doors and trunk.
• Do NOT grab the door handle, when pushing
the door handle button. This could unlock the
door(s).
Push The Button To Lock
Do NOT Grab The Handle When Locking
NOTE:
• If "Unlock All Doors 1st Press" is programmed,
all doors will unlock when you grab hold of the
front driver's door handle. Additionally, all
doors and the trunk will unlock with this option
programmed when you push the trunk button.
• If a key fob is detected in the vehicle when
locking the vehicle using the power door lock
switch, the doors and trunk will unlock, and the
horn will chirp three times. On the third at-
tempt, your key fob can be locked inside the
vehicle.
• After pushing the Keyless Enter-N-Go lock but-
ton, you must wait two seconds before you can
lock or unlock the vehicle using the door
handle. This is done to allow you to check if the
vehicle is locked by pulling the door handle
without the vehicle reacting and unlocking.
• If a Keyless Enter-N-Go door handle has not
been used for 72 hours, the Keyless Enter-
N-Go feature for that handle may time out.
Pulling the deactivated front door handle will
reactivate the door handle's Keyless Enter-
N-Go feature.

Advertisement

Table of Contents
loading

Table of Contents