Settingpanelcover - Mitsubishi Electric FREQROL-K Series Instruction Manual

- 1
,
5 . ,DISM30UNTING AND MOUNTING
Vl i l l B l u j N Wi i 0 K
As standard, the inverter is supplied wlthout cover fixing screws. However, the cover can also be
fixed by use of mountlng screws. In this case, ~nstall the cover, referring to the follow~ng working
procedure and Fig. 6.
Working procedure
(1
1
After removing the front cover, drill holes wlth a drill, etc. a t positions shown in Fig. 6 from
the rear surface of cover. The hole diameter should be 4.5 to 5.0 mm.
( 2 ) After installing the front cover, securely fix the cover by use of the following screws:
Fig. 6 lnstallat~on of Cover w ~ t h Screws
As shown In Fig. 7, lightly push the left end portion of setting panel cover and slide
it
to the
right. Then, the cover can be removed.
In thls case, the settlng panel cover is completely removed from the front cover. Therefore,
take care not to drop or lose it.
Used screws FR-K-S1500, S2200
. . .
.
. .
.
.M4 x 0.7 x 30
F R-K-S3000
. . . . . . . . . .
L~ghtly
push
and pull to the r~ght
/
.
Fig. 7 Removal of Senlng Panel Cover
After dr~lllng holes In the cover, f ~ x w ~ t h screws.
-Top r~ght, top left
(2
postt~ons)
Setting Panel Cover