Symbols Used; User Information - Bosch OBD 100 Original Instructions Manual

1.

Symbols used

1.1 In the documentation
1.1.1 Warning notices -
Structure and meaning
Warning notices warn of dangers to the user
or people in the vicinity. Warning notices also
indicate the consequences of the hazard as well
as preventive action. Warning notices have the
following structure:
KEY WORD – Nature and source of
Warning
symbol
hazard!
Consequences of hazard in the event
of failure to observe action and
information given.
¶
Hazard prevention action and
information.
The key word indicates the likelihood of
occurrence and the severity of the hazard in the
event of non-observance:
Key word Probability of
occurrence
DANGER Immediate
impending danger
WARNING Possible
impending danger
CAUTION Possible dangerous
situation
1.1.2 Symbols in this documentation
Symbol Designation
Attention
!
Information
i
1. Multi-step
2. operation
One-step
e
operation
Intermediate

result
Final result
"
1.2 On the product
!
Observe all warning notices on products and
ensure they remain legible.
Robert Bosch GmbH
Severity of danger
if instructions not
observed
Death or severe
injury
Death or severe
injury
Minor injury
Explanation
Warns about possible property
damage.
Practical hints and other
useful information.
Instruction consisting of
several steps.
Instruction consisting of one
step.
An instruction produces a
visible intermediate result.
There is a visible final
result on completion of the
instruction.
Symbols used | OBD 100 | 3
2.

User information

These operating instructions describe the
functions of the OBD 100 and contain step-by-
step directions for use of the OBD 100. Study
and observe these operating instructions in full
before using the OBD 100. It is also essential
to heed all the vehicle manufacturer's safety
instructions and information.
2.1 Terms of warranty
The warranty is expressly restricted to the
first purchasers of Bosch electronic diagnostic
testers (referred to in the following as units). A
2-year (24-month) warranty against material and
manufacturing defects applies to Bosch units as
of the date of delivery. This warranty does not
apply to any units used incorrectly, modified or
employed for a purpose for which they are not
intended or which deviates from that described
in the usage instructions. The sole course of
action in the event of a defective unit is repair or
replacement by Bosch. Under no circumstances
is Bosch liable for direct, indirect, special and
exemplary damages or consequential damages
(including lost profits) whether this is based
on warranty, contract, tort or any other legal
theory.
2.2 Exemption from liability
The above warranty supersedes all other
guarantees made explicitly or implicitly,
including guarantees of marketability or
suitability for a particular area of application.
2.3 Data and software
The system software is protected by copyright.
Users have no rights or claims to the system
software other than a restricted right of use
which can be revoked by Bosch. The system
software must not be passed on or disclosed
without the written consent of Bosch. Copying
of the system software is not permissible.
569624 Rev "A"
en
|
2013-12-19