Symbols Used; In The Documentation; Warning Notices - Structure And Meaning; Symbols In This Documentation - Bosch RSCD 2100 Original Instructions Manual

1.

Symbols used

1.1

In the documentation

1.1.1 Warning notices -
Structure and meaning
Warning notices warn of dangers to the user or people
in the vicinity. Warning notices also indicate the con-
sequences of the hazard as well as preventive action.
Warning notices have the following structure:
KEY WORD – Nature and source of hazard!
Warning
symbol
Consequences of hazard in the event of failu-
re to observe action and information given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-observan-
ce:
Key word Probability of
occurrence
DANGER Immediate impen-
ding danger
WARNING Possible impending
danger
CAUTION Possible dangerous
situation
1.1.2

Symbols in this documentation

Symbol Designation Explanation
Attention Warns about possible property damage.
!
Information Practical hints and other
i
useful information.
1. Multi-step Instruction consisting of several steps.
2. operation
One-step Instruction consisting of one step.
e
operation
Intermediate An instruction produces a visible inter-

result mediate result.
Final result There is a visible final result on com-
"
pletion of the instruction.
1.2

On the product

!
Observe all warning notices on products and ensure
they remain legible.
Robert Bosch GmbH
Severity of danger if inst-
ructions not observed
Death or severe injury
Death or severe injury
Minor injury
Symbols used | RSCD 2100 | 19 |en
2.

Important notes

Before commissioning, connecting and using
Bosch products, it is essential to go
through the operating instructions/manual
– and the safety instructions, in particular
– with great care. By doing so you can eliminate any
uncertainties when handling Bosch products and thus
associated safety risks upfront; something which is in
the interests of your own safety and will ultimately help
avoid damage to the device. Whoever passes a Bosch
product onto another person must hand over, in additi-
on to the operating instructions, the safety instructions
and information on the intended use to this person as
well.
2.1

Intended use

¶
The RSCD 2100 is to be used only for adjustment
of distance sensors (radar technology) on motor
vehicles. Any other or additional application does not
constitute the intended use
¶
The RSCD 2100 may be used only by trained and
briefed personnel. The manufacturer (Bosch GmbH)
assumes no liability for possible damage arising from
improper, incorrect or negligent use.
¶
RSCD 2100Make sure operating and safety instruc-
tions are always readily to hand at the usage loca-
tion.
¶
Heed all the safety instructions and hazard warnings
on the RSCD 2100 and make sure these are always
complete and clearly legible.
¶
Operate the RSCD 2100 and the accessories requi-
red for testing only within your specific work area.
¶
Before switching on the RSCD 2100, ensure that the
test equipment is correctly set up and connected.
¶
Observe the intervals specified or given in the opera-
ting instructions for routine checks/maintenance.
¶
Maintenance work is never to be performed during
operation. Shutoff the unit prior to performing main-
tenance. Disconnect the RSCD 2100 from the mains
voltage system prior to performing maintenance.
¶
Follow the instructions for switching on and off sti-
pulated in the operating instructions along with the
notes for repairs when performing any work!
|
1 690 386 085 2018-08-21