Ribao CS-610S+PRO Operation Manual page 12

CS-610S+PRO Operation Manual V1.3
Firstly, it will enter into SYSTEM SET submenu, press
key to make he cursor up and down. And then press SET key to enter
t
different setting interface.
1. TIME
Under this interface, if you need to update date and time, please
firstly press SET key to make the cursor blinking and then by press
key to make the cursor moving. Directly press 0~9 numeric key to
set your desired date and time. Press CLR key to clear data. After all
settings are finished, press ESC key to return to main menu interface.
2. BUZZER
Under this interface, please press
this function. After setting, press ESC key to return to main menu
interface.
3. POINT
Under this interface, please press
this function. After setting, press ESC key to return to main menu
interface.
or
or
Page 12 of 16
or
key to turn ON/OFF
key to turn ON/OFF