Ribao CS-610S+PRO Operation Manual page 11

CS-610S+PRO Operation Manual V1.3
For example, set batch number as 10 for Denomination 2.00 coin.
When the machine counted the 10th coin, the machine will stop
running with blinking warning message "2.00 BATCH OK" and the
buzzer will beep. After user takes out the coins and then presses
START/STOP key, the machine will continue counting and the warning
message will disappear.
(2) VALUE
Under VALUE interface, press
Under one channel, press SET key to fix the VALUE setting mode, the
VALUE will flash. At this moment, you can change the value of this
channel through pressing numeric key
setted the value can be cleared to be 0.
Notes: The value is already set in the factory and the function is
locked so the user can not change the value.
When one channel Value No. setting is finished, you can come
back to channel number selection interface by pressing SET key and
then repeat the above number setting way to set value number for
other target channels. After all settings are finished, press ESC key to
quit from VALUE submenu to come back into main menu interface.
(3) SYSTEM
key to switch the channel.
，
0 ~
Page 11 of 16
9. Press CLR key, the