Daily Alarm Mode; Extended Warranty - Timex Ironman Transit+ User Manual

DAILY ALARM MODE:

Press button C until the mode prompt shows "ALRM". The Alarm-1 prompt "AL-1" will be displayed at the upper
row. The alarm time is displayed at the lower row.
Press button D to select Alarm-1 (AL-1), Alarm-2 (AL-2) and Chime (Hourly chime function).
Press button B to turn the function on / off. If alarm is turned on, "on" will be displayed at the bottom right corner.
If "--" is displayed, the alarm is turned off.
In Alarm mode, press and hold button C to enter the Alarm Time Setting mode. Press button C to select the
data for setting. Press button B or D to change the selected setting digits.
Press and hold button C again to exit the setting mode.
Press any button while alarm sound is active to turn off the sound alert.
INDIGLO® night-light:
The watch provides INDIGLO® backlight for reading the display in dark environments. Press button A in any
mode to turn on the backlight. It lights up the display for 3 seconds.
BATTERY:
The watch operates with a 3V CR2032 battery. Below are some instruction for using and changing battery.
• Never expose the battery to excessive heat such as sunlight, fire or the like.
• Do not short-circuit the battery and do not take it apart.
• If necessary, clean the battery and unit contacts before inserting the battery.
• Dead batteries should be immediately removed from the device.
• Only replace the battery with a 3V CR2032 battery.

EXTENDED WARRANTY

Available in U.S. only. Extend your warranty for an additional 4 years from
date of purchasefor $5. You can pay with AMEX, Discover, Visa or MasterCard
7