Baseline BaseStation 3200 Manual

BaseStation 3200 Irrigation Controller Shortcuts
When you are configuring the settings on a BaseStation irrigation controller, you need to navigate through
many screens and press the controller buttons many times to complete the tasks. Fortunately, the following
shortcuts will help you complete some of the most commonly performed tasks more quickly.

Quickly Move to the Next Item for Configuration

When you are configuring zones (the controller dial is
on Zones), you can press the Enter button in any field
to move to the next zone number.
When you are setting up programs (the controller
dial is on Programs), you can press the Enter button
in any field other than the Program field to move to
the next program.
This shortcut also works in other screens with a
similar layout, such as Water Sources > Assign
Devices to Water Sources. Pressing Enter in any field
will advance to the next POC.
Note: If you make changes on one screen and then
press Enter to advance to the next screen, your
changes on the first screen are saved.

Quickly Return to Zone 1

When you are configuring zones (the controller dial is
on Zones), you can press the Back button when the
cursor is in the Zone field to go to Zone 1.
Baseline Support: 866-294-5847 1 www.baselinesystems.com