Advertisement
This symbol is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions.
This symbol is intended to alert the user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electrical shock.
CAUTION: To reduce the risk of electrical shock do not remove the cover or back of this
CAUTION: To prevent electric shocks and risk of fire hazards, do not use other than
1. UNPACKING and HANDLING
Each unit is shipped assembled and factory tested.
Ensure that all accessories are removed from the container before discarding packing material
2. MECHANICAL INSPECTION
Inspect the front and rear of the equipment for shipping damage. Make sure the equipment is
clean, and no connectors are broken, damaged, or loose.
damaged or defective please contact your distributor or SecurityTronix at 1-610-429-1511 for
assistance.
3.
SPECIAL ATTENTION
a. The installer must comply with electrical safety standards.
b. This unit is designed to use AC power. Using a power source other than 90 – 260VAC
will damage the unit.
c. Only qualified installers are allowed to install and test the unit.
d. The ST-CCTV-VBAC8 is intended for indoor installations. If installed outdoors proper
safety and lightning grounding are required.
4. PRODUCT DIAGRAM
v2.0 10/26/10
INSTALLATION AND OPERATION
unit. No user serviceable parts are inside.
specified power source.
If equipment appears to be
3
Advertisement
