Warnings: Avoid; Minimum Clearances - Carrier AQUASMART 42JW Series Installation Manual

42JW/AQUASMART
Warnings: avoid..., minimum clearances
Exposure to direct sunshine, when unit is operating in cooling
mode; always use shutters or shades.
Installation not correctly levelled which will cause condensate
dripping.
Only partial insulation of the piping.
Minimum clearances (mm)
220
Connecting condensate piping to sewage system drain without
appropriate trap. Trap height must be calculated according to the unit
discharge head in order to allow sufficient and continuous water evacuation.
Flattening or kinking pipes or condensate pipes.
Any slack in the electrical connections.
200
E N G L I S H
GB - 3