Url Blocking - Planet Networking & Communication WDRT-730 User Manual

Object
Client PC Description
Client PC IP Address
Client Service
Protocol
Port Range
5.2.7.3.

URL Blocking

If you want to prevent the computers in local network from accessing certain websites, you can use
this function to stop the computers in local network from accessing the websites you defined here.
Object
URL/Keyword
Please input any texts up to 16 alphanumerical characters to describe
this IP address.
Please input the starting IP address in the left field, and input the end IP
address in the right field to define a range of IP addresses, or just input
the IP address in the left field to define a single IP address.
Please check the services you want to allow or deny this IP address to
access, and you can check multiple services.
If the service you need is not listed above, you can create a new service
on your own. Please select TCP or UDP. If you're not sure, please select
'Both'.
Please input the port range of new service here. If you want to specify
port 80 to 90, please input '80-90'; if you want to apply this rule on a
single port, just input the port number, like '80'.
Table 5-34
Figure 5-47
Input the URL (the host name or IP address of the website, like
http://www.blocked-site.com) you want to block here, or the keywords
which is contained in URL.
User Manual of WDRT-730
Description
Description
-66-